OMNIA
      Back to home
      1. Knowledge Base Home
      2. Access Control Software
      3. OMNIA

      Emergency Mode On The Dashboard

      Emergency Mode On The Dashboard

      Print

      Emergency Mode On The Dashboard



      Add a command widget to the dashboard.





      • Choosing site will activate Emergency mode across all controllers
      • Choosing Controller will activate Emergency mode only on the selected controller
      • Choosing Reader will activate Emergency mode only on the selected reader.



      • Click Save

      • The widget will display as shown below




      You will need to Edit the Behavior of the Emergency Mode in the Reader Profiles.


      • Go to Setup/Reader Profiles


      • Select the Reader Profile that will be affected by the Emergency Mode


      • Choose Behavior



      • Select Edit Behavior


      • Scroll down to Emergency



      • select output states

      • Select to either Drive or Not Drive Relay depending to lock type/lock action.

      • Select Save


      Toggle Emergency mode from the Portal Dashboard.